Integrated
Design
Patented
variable fluid flow technology
Fast
Spraying
Low Pressure
Spray Gun
Light
Weight
Ergonomic
Design
Perfect
Spraying Clear Coat
Delicate
Atomization
PORPHIS PRD-510 | Professional LVLP Spray Gun
Professional Results on Home Air. Minimum Overspray. Maximum Savings.
$199.99
In stock, ready to ship
More Accessories
<p>Earn%20[points_amount]%20when%20completing%20this%20purchase.</p>
Integrated
Design
Patented
variable fluid flow technology
Fast
Spraying
Low Pressure
Spray Gun
Light
Weight
Ergonomic
Design
Perfect
Spraying Clear Coat
Delicate
Atomization
Free & Fast Ship
1-Year Warranty
60 Day Free Trial
1-on-1 Customer Service
PORPHIS PRD-510 | Professional LVLP Spray Gun
Purple / 1.0mm / Gun Only (No Cup)
$199.99
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
Painter Review
UNBELIEVABLE!! Speed of Sagola Atomization of Iwata Small air compressor PORPHIS PRD510
@thetriggerman954
CRAZY CUSTOM PAINT JOB USING $50 PAINT SPRAYING JAMS WITH THE NEW PORPHIS PRD 510 LVLP SPRAY GUN
WHITLEY AUTO WORKS
Small compressor, great results
– No upgrade needed.
Many DIY users don’t realize until after buying a spray gun that their home compressor just can’t keep up. The pressure drops, atomization falls apart, and the finish ends up rough as sandpaper.
The PRD‑510 uses LVLP (Low Volume Low Pressure) technology, consuming only 160 L/min (5.7 CFM) — far less than traditional HVLP spray guns (12–15 CFM). Your existing small compressor (8–24L) can drive it with ease, so you don’t have to upgrade your equipment. The money you save can buy you several cans of good paint.
Set it and forget it
— Consistent spray every time.
Many entry‑level spray guns have a simple air valve design. Even a small pressure fluctuation can make the fluid delivery fluctuate — the spray pattern you just tuned starts to warp after a few passes. The result is an uneven finish that requires rework and sanding.
The PRD‑510 features a patented integrated air valve structure, with precisely engineered air passages for better sealing and more stable pressure output. Combined with a smooth trigger, it delivers consistent fluid flow whether you spray continuously or intermittently, giving you a uniform, smooth finish. The time you save from rework is enough to spray another part.
Non-slip grip, even with paint on your hands.
During spraying, your hands inevitably get paint or solvent on them. Ordinary smooth gun bodies tend to slip, forcing you to grip harder. Your wrist quickly tires, and your spraying precision suffers.
The PRD‑510 features a forged aluminum body with a non‑slip grip design. Even with oil or paint on your hands, you maintain a firm hold. Combined with its lightweight body (only 460g), it won't fatigue your hands during long sessions, letting you focus on the finish instead of fighting with your tool.
Tool-free, quick-clean, no clog
— Cleaning made simple.
After each spray session, does cleaning your gun always feel like a “tool battle”? Finding wrenches, unscrewing bolts, removing springs, parts dropping everywhere… Even worse, after spraying clear coat, a layer of hardened paint builds up in the air cap and nozzle, causing clogs the next time you use it.
The PRD‑510 features a modular quick‑release design. Core components can be disassembled by hand — no tools required. The fluid passages in the air cap and nozzle are optimized to resist paint buildup, greatly reducing the chance of clogging. When you‘re done spraying, just take it apart, soak it, rinse it — a few minutes and it’s done. Your tool stays in top condition, ready to spray the next time you pick it up.
Which PRD-510 Setup Should You Choose?
Tech Specs
Specification
Materials and Processes
Included in the Box
600ml white cup
Manual
Service kit
Spray gun
Complete Your Master Setup
From $138.99
From $199.99
From $232.99
FAQs - PRD-510
Can I spray clear/basecoat straight out of the box?
A:For best results, we recommend a "first‑spray system test" before loading paint. Simply add a small amount of thinner to check the fan pattern and fluid flow. This also lubricates the needle seal and ensures your first coat is flawless.
Does your spray gun have high air compressor requirements? Do I need complex air drying equipment?
A:Compared to traditional guns, our LVLP core technology optimizes air passages and reduces sensitivity to ambient humidity by about 15%. Nevertheless, to achieve a mirror‑like finish (especially for high‑gloss clear coats), we still recommend installing a simpleoil‑water separatorin the air line. This ensures fine, stable atomization regardless of season.
My compressor is only 8L / 2HP – can it run the PRD-510?
Absolutely. The PRD-510 consumes only 5.7 CFM (160 L/min). A small 8–24L compressor can easily drive it – no need to upgrade.
Is LVLP spraying very slow? Is it suitable for painting an entire car?
A:That's a common misconception. Although LVLP is known for low air consumption, our High‑Flow control technology allows a generous fluid output even at low pressure. For spot repairs, it's as precise as a scalpel; for whole‑car painting, simply pair it with a 1.4mm or 1.5mm nozzle. The actual application speed is comparable to conventional spray guns, while saving you about 30% of paint waste.
Are the air cap and nozzle durable? Will they scratch as easily as other brands?
A:Our air caps are made of high‑hardness aviation aluminum with a secondary hardened anodized finish. Every nozzle set is visually inspected before leaving the factory to ensure no burrs or scratches. Even under prolonged solvent exposure, the wear‑resistant surface stays smooth, preventing paint buildup and making cleaning extremely simple.
Do you offer different nozzle sets? Is it difficult to change them?
A:Yes, we offer complete sets from 1.3mm to 1.8mm. Unlike compatibility issues found with some competitors, our needles, nozzles, and air caps are module‑precision matched. Using just one wrench, you can swap the set in under a minute, allowing your spray gun to seamlessly switch between primer, basecoat, and clear coat.
Will the needle seal leak and cause dripping or paint leakage?
A:Our LVLP series uses high‑precision Teflon sealing components with needle and nozzle that are lapped together. Even under heavy use, the needle returns fully to stop dripping. If accidental impact damages the seal, our design allows tool‑free quick adjustment of seal tightness.
What's the advantage over competitors like the InoKraft Drizzle D1 PRO?
A:In the same price range, the PRD-510 offers higher durability (all‑metal core), lower air consumption (5.7 CFM), and higher transfer. Many users report that its atomization uniformity and trigger control are better than similarly priced competitors.
S
Great him for mobile painters using a small compressor!
Thanks, Stevie! You nailed it – the PRD‑510 is indeed a great choice for mobile painters and anyone running a smaller compressor. LVLP efficiency makes all the difference when you're on the go. Really appreciate you taking the time to share that insight!
A
Works great
Thank you for the 5-star review, Brent! We're thrilled to hear that the PRD-510 is working great for you. Our LVLP technology is specifically engineered to provide a professional finish with maximum transfer efficiency and minimal overspray. We appreciate your support and happy painting!
P
This spray gun is really impressive for the price. The atomization is smooth, the fan pattern is even, and it lays clear coat very nicely. Easy to adjust and comfortable to use, even for longer jobs. The results were surprisingly good. Definitely recommended for both beginners and DIY painters.
Thank you for the fantastic feedback! We are thrilled to hear that the smooth atomization and even fan pattern exceeded your expectations. We specifically engineered this gun to deliver professional-grade clear coat finishes at an accessible price point. Knowing that it stays comfortable during longer jobs is a great validation of our ergonomic design. Thank you for the recommendation!
e
Honestly best lvlp gun I have ever used . I have 3 other lvlp guns this porphis one tops all of them them a the build quality can feel the difference to.
We are honored to receive this 'Best LVLP' title from a pro like you! When a painter who owns multiple units says our gun tops them all, it truly speaks to our craftsmanship. We believe that professional tools should not only perform better but also feel superior in the hand. Thank you for choosing Porphis and for recognizing the effort we put into every detail. Enjoy the consistent results!
P
I read a review that someone said that this GUN had now replaced his
PRO LITE. Can I say; "ditto"!!!!!! WOW! I spray for a living. This 510 is my new go to clear gun. ( will be spraying bedsides on a 2025 BLACK F-150 in the morning, and am excited to use this tool as it lays down clear on single panels absolutely gorgeous! ) FYI. I may get another for base. shhhh
Wow, what a massive compliment! Replacing a legendary gun like the Pro Lite is the ultimate validation for our PRD-510. We know that spraying clear on a 2025 Black F-150 is the ultimate test for any pro—black shows everything! We’re thrilled to be your new 'go-to' and can’t wait to hear how that gorgeous finish turns out tomorrow. And don't worry, your 'secret' about the base gun is safe with us! Happy spraying!
I
Sprayed awesome love it
Awesome! We are so glad you love the PRD-510. There’s nothing like a professional LVLP gun that just works perfectly every time. Thank you for choosing Porphis and for sharing your 5-star experience. Enjoy your new setup!
J
Custom painted an old cooler to match my brother's hot rod today and the PRD 510 is fantastic laid out the base and clear spot on. And I'm spraying in a 10x10 shed with a home made exhaust system and a 20 gallon 7.7 CFM air compressor
Thanks, Jeff – that sounds like such a cool project! 😎
Custom painting a cooler to match your brother's hot rod is exactly the kind of creative work we love hearing about. And knowing you pulled it off in a 10×10 shed with a homemade exhaust system? That's seriously impressive.
Really glad the PRD‑510 delivered on both base and clear – that's what it was built for. Appreciate you sharing this with us! 🙌
H
Great value, have not used it yet but the build quality for the price is exceptional. If it performs like the MP338 I will be more than happy with the purchase.
Thanks, Howard! That’s high praise – and we’re confident the PRD‑510 will live up to the MP338’s reputation. Hope it exceeds your expectations! 😊
G
Great gun I love how you can run it in low pressure on a small compressor
Thanks, Gary! That low‑pressure performance is exactly what we designed the 510 for – glad it's delivering on your small compressor! 💪
S
I love this gun
Thank you, Stevie! So glad to hear you're loving the PRD‑510. That kind of feedback really makes our day – and it's great to know the gun is serving you well. We appreciate you taking the time to share your experience! 💪
K
I love this gun. Ran it with a makita 5200 big bore. Small compressor and the gun worked great. Got good atomization also. Very happy. Panted a hood. A fender and a few doors. I even shot primer (thinned) base and clear with 1.3 tip. Metallic paint did well too.
Thanks, Kenneth! So glad the PRD‑510 worked great with your Makita setup – even primer, base, clear, and metallics all with the 1.3 tip. Appreciate the kind words!
B
Works great at 20psi.. Does not blow the small parts all over the place. Low overspray and does not kick up a lot of dust in my homemade booth.. Get the 1.3 tip set and you got two guns in one .!!!! GTI pro light going back in in the box ….
b
Works great at 20psi.. Does not blow the small parts all over the place. Low overspray and does not kick up a lot of dust in my homemade booth.. Get the 1.3 tip set and you got two guns in one .!!!! GTI pro light going back in in the box .